Print Method: Inkjet
Print Resolutions: Up to 4800 dpi
- Draft Mode: 4” per second
- Normal Mode: 1.3” per second
- High Quality Mode: 0.54” per second
Print Head: Replaceable Print Head
Inks: Individual ink cartridges for Cyan, Magenta, Yellow and Black
Colors: 16.7 million
Color Matching: Z-Color™ Color Matching Software
Max. Print Width: 8.25" (210mm)
Media Width: 8.375" (213mm)
Media Types: Roll-fed pressure-sensitive labels, or roll-fed tags
Media Sensing: Moveable see-through sensor for die-cut labels; reflective sensor for labels and tags with black stripe; can use continuous and pre-printed labels and tags
Supply Roll: 6" (152mm) maximum diameter on 3" (76mm) core.
Ink Level Warning: Calculates actual number of prints remaining based upon ink usage of graphics being printed (patent-pending)
Indicator Lights: Power, Pause, Ink
Controls: Pause, Feed, Unload, Cancel
Operating Systems: Windows® 7/8/10+
Data Interface: USB 2.0; External Control Port
Label Design Software: BarTender UltraLite Primera Edition included. Can also be used with most other popular label design and graphics software programs
Electrical Rating: 12VDC, 5.0A
Power Requirements: 100-240VAC, 50/60 Hz, 1.7A
Certifications: UL, UL-C, CE, FCC Class A
Weight: 45 lbs. (20.4 kg)
Dimensions: 19.5"W x 10.2"H x 20.5"D (495mmW x 259mmH x 521mmD)
Connectivity: Hi-Speed USB 2.0
Included: Bartender Ultralite software for Windows, 4”X3” Tuffcoat™ Extreme White Polyester starter roll and starter CMYK ink set.
Label width: 0.5" (12.7mm) - 8.25" (209.6mm)
Liner/media width: 1.5" (38.1mm) - 8.375" (212.7mm)
Label height/length: 0.5" (12.7mm) - 24" (609.6 mm)
Gap between labels: 0.1" (2.5mm) - 10" (254mm)
Width of thru-hole opening: 0.25" (6.4mm) - 0.5" (12.7mm)
Distance from edge of media to edge of thru-hole: 0.2" (5.1mm) - 2.25" (57mm)
Reflective/Black Mark Width*: 0.1" (2.54mm) - N/A
Max Outer Diameter (OD): N/A - 6"(152.4mm)
Inner Core Diameter (ID): 3" (76.2mm) - 3" (76.2mm)
Total Thickness (Liner + Label)**: N/A - 0.010” (10 mil)
Distance from edge of media to edge of label: Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset.
* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.
** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.